Our premium service: Aeroseal duct sealing

Stop Your Attic From Breathing Into Your Bedroom.

Most duct cleaning is like washing your car with the windows down. If your ducts aren’t sealed, you are constantly sucking in attic dust, insulation fibers, and basement moisture.

  • Seals leaks up to 5/8″
  • Most homes in 4–6 hours
  • Non-toxic sealant
Inside a pressurized duct: Aeroseal sealant particles collect at each gap until it closes, and leakage drops from 576 to 18.8 CFM25. Seam gap Torn joint Pinhole
Animated illustration of Aeroseal sealing three duct leaks from the inside.

What is Aeroseal duct sealing?

Aeroseal is a patented process that seals leaks in ductwork from the inside. The duct system is pressurized and a non-toxic aerosol sealant is blown in; as air escapes through cracks and gaps, the sealant particles collect at the edges and build up until each leak is closed. Computer monitoring measures leakage before and after, and you get a certificate with the results.

Why Aeroseal is our premium service

The Invisible Intruder. Your Home is Sucking in the “Outside”

Conventional cleaning only touches the surface. Without a scientific seal, your HVAC system acts like a vacuum, pulling in allergens from the dark, unconditioned spaces of your home. Here’s how we close that door for good.

How Aeroseal seals a home’s ductwork from the inside A cut-away of a home with ducts in the attic and basement. Attic dust and basement moisture are pulled in through four leaks. After cleaning, the Aeroseal machine pressurizes the ducts, sealant particles collect at each leak until it closes, and leakage drops from 576 to 19 CFM. Upstairs Main floor Basement Attic PROTECTED Furnace Attic dust & fiberglass Damp basement air READY Aeroseal

Aeroseal certificate

Shelby Township home, August 2026

57618.8CFM25

96.7% of the leakage sealed

View the certified report (PDF)

Why cleaning has to come first

The sealant needs clean metal to bond to, sealing pressure would blow old dust into your rooms, and brushing ducts after sealing could chip the new seal. That’s why duct cleaning is mandatory immediately before Aeroseal.

  1. FirstCleanRemove legacy dust
  2. ThenSealClose leaks from inside
  3. FinallyShieldHospital-grade filter

Read: Why is duct cleaning mandatory before the sealing process?

The Clean Air Reset Package

This isn’t just a cleaning; it’s a permanent air quality barrier for your family’s health.

  1. Air duct before and after legacy dust removal
    Step 1

    The Clean

    We remove the legacy dust. Years of accumulation and biological contaminants are professionally extracted from your system.

  2. Air Duct Repair Aeroseal
    Step 2

    The Seal

    We lock the “outside” air out of your “inside” air. Using specialized tech, we create an airtight barrier that prevents re-contamination.

  3. Supply register delivering filtered air after an Aeroseal Clean Air Reset
    Step 3

    The Shield

    Hospital-grade filtration that finally works because air is actually reaching the filter instead of leaking through the attic.

The 30-Day Satisfaction Promise

“We can’t eliminate 100% of the dust in the world, but we can drastically cut down what gets into your home. If you aren’t completely satisfied with the difference Aeroseal makes in your first 30 days, call us. We will return to inspect our work and make it right.”

How much are your ducts leaking?

Move the sliders to estimate how much conditioned air your ducts lose and what sealing could save each year. Your in-home test replaces these estimates with real measurements.

2,000 sq ft
$2,400/yr

Gas for the furnace plus electricity for the AC. Your DTE or Consumers Energy bills show it.

25%

Typical homes lose 20–30% of their air through duct leaks. A pre-seal test measures yours exactly.

Estimated yearly savings after sealing

$324

Likely range: $243 – $405

■ Air reaching your rooms ■ Air leaking into walls, attic and basement

Air leaking right now333 CFM
That’s roughly the airflow of3 supply registers
Estimated savings over 10 years$3,240
Clean Air Reset, typical 1,501–2,500 sq ft ranch$2,300 – $3,200

How we estimate: about 400 CFM of system airflow per ton of capacity and one ton per 600 sq ft; 60% of leaked air is lost outside your living space; sealing closes about 90% of leakage. Planning estimate only. Real savings depend on your measured leakage, where your ducts run and your energy rates.

Get A Free Quote

Certified Aeroseal results

Proof, not promises

Aeroseal’s computer measures leakage the whole time it seals. When we’re done, you get a certificate showing exactly how much air your ducts leaked before and after. Here are five of ours.

Average leakage sealed
95.9%
Duct leaks closed
2,084CFM
Leakage as share of system airflow
32.6%→ 1.3%
Certified homes shown
5Macomb County

Sterling Heights home

1,200 sq ft, Main furnace, supply ducts, August 2026

97.3%leakage sealed

Duct leakage at 25 Pa

Before327 CFM
After9 CFM

Leakage as a share of system airflow

40.9%1.1%

All the leaks added up into one hole, drawn to scale

61.9 sq in 1.7 sq in

Before sealing, this home was leaking through the equivalent of a 7.9-inch square hole. After: 1.3 inches.

The certificate rates this improvement as equivalent to planting 118 trees.

Aeroseal certified leakage report, Sterling Heights, August 2026 View the certified reportCertificate PDF
Watch the leaks close in real time Shelby Township, 2,700 sq ft, August 2026
575.7CFM leaking0 min
0 200 400 600 0 10 20 30 40 minutes

Traced from the certificate’s live leakage graph. Start and finish are the certified readings: 575.7 CFM down to 18.8 CFM.

Figures from Aeroseal certified leakage reports (HomeSeal Advance) issued to Advanced Air Care customers in 2026, measured at a standard 25 Pa. Results vary by home.

Medical-Grade Thinking for the Modern Home.

  • Reduce Allergy & Asthma triggers by more than 90%.
  • Eliminate “Old House Smell” by sealing out crawlspace odors.
  • Hospital-proven technology, now available for your family.
  • Extend the lifespan of your HVAC equipment.

99%

Pathogens Filtered

0%

Leakage Target

Future Proof

System Optimization

Aeroseal Duct Sealing: Frequently Asked Questions

More answers on health, allergies and dust in our Aeroseal FAQ.

What exactly is Aeroseal duct sealing?

It’s a specialized process that seals leaks in your home’s ductwork from the inside out using a non-toxic, aerosolized sealant.

How much can I save on my energy bills?

Homeowners typically see a reduction in heating and cooling costs by up to 30% after sealing leaky ducts. Try the savings estimator above for your home.

How long does the process take?

Most residential Aeroseal applications are completed in just 4-6 hours.

Is Aeroseal safe? Is the sealant safe for my family and pets?

Yes! The sealant is non-toxic and has been used in hospitals and schools for years.

How do I know if my ducts need sealing?

If you notice uneven temperatures between rooms, excessive dust, or high energy bills, your ducts are likely leaking.

How much does Aeroseal cost in Macomb County?

Pricing depends on your home’s square footage, the number of HVAC systems and the condition of the ductwork. For the most common Metro Detroit profile (a 1,501–2,500 sq ft ranch, 10–25 years old, one furnace/AC, ducts in good condition) our Clean Air Reset estimate is $2,300 – $3,200, including the mandatory source-removal duct cleaning and Aeroseal installation. Get your estimate.

Why do you require duct cleaning before Aeroseal?

The sealant needs a clean, dust-free surface to bond to, sealing pressure would otherwise blow old dust into your rooms, and cleaning after sealing could chip the new seal. Full explanation.

Breathe Better. Live Longer.

Schedule your Clean Air Reset today and feel the difference of scientifically purified air.